A standalone tube furnace is the preferred way to evenly heat small, volatile samples that don’t require strict atmospheric control.
With max temperatures from 1200°C to 1800°C and tube diameters of 50mm to 120mm, there’s a cost-effective yet uncompromising option for your laboratory.
Up to three hot zones and programmable controllers are standard.
University Labs
- Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
- Environmental and chemical researchers who need combustion of materials.
- University labs who anneal Si wafer in vacuum condition.
- Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
- Recommended products – SH FU 100STG (1200°C tube furnace), SH FU 10MGV (1200°C vacuum muffle furnace), SH FU 80TS WG (1800°C super high temperature tube furnace gas flow system), SH FU 4MH (1500°C high temperature muffle furnace), SH FU PK H2 (1500°C high temperature tube furnace gas flow system with chiller and vacuum pump turnkey system)
Manufacturing, Engineering, and Testing Labs
- Destructive testing where carries heat treatment of titanium at 1400°F ~ 1930°F (760°C ~ 1050°C) and is critical that the variation in temperature from the furnace set point at those temperatures is not greater than x%.
- General testing where carries heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
- Analytical research testing which needs to perform various material testing with thermal treatment.
- Oil and gas measurement and analysis.
- Recommended products – SH FU 5MG (1200°C general temperature muffle furnace), SH FU 3MGE (1050°C economic muffle furnace)
Material Innovation
- Manufacturing fiber optic products.
- Material innovation companies who do sintering in vacuum or in inert gases.
- Engineering companies who do curing and sintering solutions in porous ceramic tubes.
- Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
- Manufacturing industrial thermocouple and mineral insulated cable.
- Recommended products - SH FU 120LTG (1200°C general temperature tube furnace), SH FU PK H1 (1500°C high temperature tube furnace gas flow system with chiller and vacuum pump turnkey system ), SH FU 31MGV (1200°C vacuum muffle furnace )
Semiconductor & Battery Production
- Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
- Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace.
- Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte, etc.
- Manufacturing chemicals for cleaning and etching applications in the semiconductor.
- Recommended products - SH FU 80TH WG (1500°C high temperature tube furnace gas flow system), SH FU 100LTG (1200°C long hot zone tube furnace)
Medical
- Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
- Medical implants manufacturers who anneal alloy powders.
- Recommended products - SH FU 14MG (1200°C general temperature muffle furnace with gas flow system with ball type flowmeter), SH FU PK S4 (1800°C super high temperature tube furnace gas flow system with chiller and vacuum pump turnkey system)
Water & Soil Contamination Analysis
- Waterpark companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
- Authority who provides the drinking water and wastewater services.
- Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
- Recommended products - SH FU 3MGE (1050°C economic muffle furnace), SH FU 5MGE (1050°C economic muffle furnace), SH FU 3MG (1200°C general temperature muffle furnace)
Construction
- Ceramic sintering.
- Developing painting and coating materials.
- Building companies who transforms metallic powder such as nickel alloy into sintered materials by sintering.
- Engineering companies who do curing and sintering solutions in porous ceramic tubes.
- Civil engineers who need soil combustion.
- Recommended products - SH FU 3MG (1200°C general temperature muffle furnace), SH FU 11MS (1800°C super high temperature muffle furnace)
Environment & Technology Solution Engineering and Provider
- Civil engineers who need soil combustion.
- Material technology providers who develop polymer composites and graphene materials.
- Applied science engineers who process solid oxide fuel cells (SOFC).
- Recommended products - SH FU 11MGE (1050°C economic muffle furnace), SH FU 27MG (1200°C general temperature muffle furnace)
Aerospace-related
- Aerospace companies who perform cyclic oxidation test between 1700°C to room temperature in atmosphere-controlled environment.
- Aerospace companies who need heat-duty material development without gas atmosphere.
- Recommended products - SH FU PK S3 (1800°C super high temperature tube furnace gas flow system with chiller and vacuum pump turnkey system), SH FU 22MH (1500°C high temperature muffle furnace), SH FU 4.5MHV (1500°C high temperature vacuum muffle furnace), SH FU 80STG WG (1200°C general temperature tube furnace gas flow system)
Marine & Defense Related
- Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
- Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
- Recommended products - SH FU 80TS (1800°C super high temperature tube furnace), SH FU 4MS (1800°C super high temperature muffle furnace)